Видео

9:50 minecraft dog bark

You are wrong about anything over 15mm3/s being diminishing returns.. I but over 3 hours off my print time using filament I maxed out at 30mm3/s over a different brand using 16mm3/s

The new LDO nitehawk-36 usb toolhead board has a usb expansion port for a probe to plug into, so you dont have to run a separate cable. Unfortunately the nitehawk-sb (two piece stealthburner toolhead style) didn't get the port. Also the beacon D is a little cheaper then the beacon H at only $65 if you don't want the adxl345 accelerometer that's built in. Which you might not considering a few tool head boards already have them integrated like the nitehawk, btt SB2240, ebb36/42 or if you have a bed slinger and need the sensor to be movable from the hotend to the bed.

OK so these are (a little) quicker than an inductive probe and about as accurate. I'm sticking with inductive with Voron Z END-STOP, at least for now :)

ABS on a non enclosure printers is just wrong. The print Probably has no strength.

That's what I thought bambu lidar marketing cues was about at first

Thank you Faraday and Lenz for making it possible to get the Eddy "probe" invented.

Update: xTool has added a new feature to the S1 that allows you to take a picture with your phone to make positioning of your designs easier when doing batch production.

I love the video, but you have two tools to do the same job here. Either get rid of the weight/flex of TAP, or just use TAP to map your bed. There's zero reason for both, and the smarter play would have been to utilize beacon solo.

how do you deal with cooling on petg supports with pla ? my petg dose not stick with pla

Looks like ratrig..

Price?

Best support for PETG I’ve found is HIPS with a 0.1mm gap. I haven’t tried it with ABS, but presumably that could work just as well with PETG.

can you do an updated version of the troodon 2.0 pro

I want to buy one, but FSL sells is pretty annoying/bad, if i want a elegoo or creality product i just enter aliexpress and buy that thing. FLS digital stores are so bad, hope they invest in that. Thats why most of ppl i know from 3d printing never even put they eyes on a delta printer, they should work in logistic.

Each day we're closer and closer to downloading a car.

Or you could pay attention to the printer like everyone else

Why did you side-mount it? It fits right into the probe space behind the printhead on the mgn mount! Love my Eddy, best thing added to 3d printing since heated beds.

yOOOO

That's cool! I would like to use Eddy on my printer, but maybe my use case is a bit weird. I want to generate a mesh that I can view and adjust the bed leveling manually. Although it could still be used for compensation, I think that if I can make it more level and flat physically and reduce the compensation - it would be good. I have an EasyThreeD K9, which is a very cheap printer, and I am modding the hell out of it. Some may have seen a video on such subject, but my modding might be a bit more relaxed. No Klipper, no Octoprint, stock ET4000+ motherboard and customized Marlin 2 firmware. Do you think this will be possible to make?

我看过一个这台设备8分钟打印小船的视频，说实话质量确实不高。如果降低速度以提高质量，那我为什么不用x1c呢？😊

idk man all i want is multi color man print

Why are the printers so damn ugly? 80-90's plastic And that filament change routine has the just enough jank to remind me why I dont just buy a printer because of a spec list. The actual user experience on top of the tech has to match.

one filament option lmao. They are going in the wrong direction...

But why brother? You don’t care about our planet and would rather waste all this plastic that’ll inevitably become landfill? 😢 nah I’m kidding bro, we all waste so much material it’s insane haha

Would this work with a single toolhead?

Now do .4mm outer and .8 mm inner prints, for speed savings

You can’t just fling these market numbers around

You can cancel a object in the app

How is this in any way better than a strain gauge sensor? It’s more expensive, heavier, bigger, more complex, and less accurate. Save your money and get just about any other solution.

#2 is half moot. You can skip objects in the app. I wish it was on the interface as well and I agree on the other points!

Don't buy this. My filament gets stuck everytime in the blue block. I loved it on my other printers, but it's a dud for bamboo if you ask me.

In light of the costs I have had to endure for replacement toolhead parts from the wear and tear of changing nozzles on Bambu the Revo would probably have been a cheaper way to go.

Can this be used on the ender 3 S1 ???

Already ordered a Panda Touch, haven't installed it yet

Prusa just too expensive for me

Do you have the stl for the corner covers for the troodon 2.0? You were popping blue ones in the video. I have looked everywhere for the stl.

I'm sticking with my BLTouch while I wait for the laser rangefinder method that scans the bed while traveling at 500 mm/s, and achieves a resolution in tens of nanometers.

These stats mean nothing to everyday printing though. Especially if you print in PETG, TPU or anything non high flow PLA.

Excellent ~ I'm hooked! New sub & liked - thank you!

And what use is the Prusa Tire? Looks like a waste of material, time and electricity.

You forgot Bed Distance Sensor

Laser scanning is still the most accurate and reliable scanning method. @01:37 Claiming that this might be the last bed probe you might need to buy just shows this guy don't know what he's talking about.

I wish there was something like the Eddy to upgrade from BLTouch on an older printer.

Ams + small size to fit anywhere

I think many don’t get that Bambus are popular not simply because they are fast but is a combination of being reliable, have a working multi material system and is decently quick all in a streamlined package.

Never had any luck with BTT stuff. Their MiniE3V3 came flashed for something else, No firmware was listed for the Ender 5 Plus and Chris's set up didnt seem to work for me, Is it because im in the UK??? I got a shop to set it up, took three of their technicians 6 weeks to get a proper print, but it lost its home position all on its own and destroyed a brand new PEI bed and Spider hot end about three prints in. The Manta M8P and SP1 screen wouldnt work right on the Ender either, The Pad 7 wouldnt connect to my home system, had to buy extra routers to get it to connect but the Klipper part wouldnt update so it went back in the box. How can i be so unlucky to get all their faulty stuff??? Im not a programing wiz but the guys in the shop are and theyve told me not to bring them anymore BTT to set up. This stuff brought me one thing, Depression..... and a empty wallet from having to pay people who know to set it up without any real success. Im sorry i cant give them a big up but why would I. My No good Fancy tat box is nearly full.

Hi Taylor. Thinking about buying one of the pro minis. What are the assembled printer dimensions? The dimensions on the website seem too big. 500+x500+mm for a 250x250mm build plate. Thanks.

I'm impatiently waiting for more content and opinions on this machine. 😅

The trouble with being skint, You save for months to buy a new Bambu s1 and someone brings out something better... that you cant afford. Or have space for now lol.